Amplify+ Adjustable Gain Preamplifier for Professionals
Overview
Amplify+ is intended for outdoor professional use, including multi-dwelling units and commercial applications. The product provides separate UHF and VHF inputs for two-antenna, band-specific installations, as well as a switchable FM trap. (When installing a splitter with this amplifier it must be a power passing splitter, most common splitters will not pass power.)
Amplify+ is an outdoor preamplifier designed for mast-mounting with the TV antenna(s). Professional installers may choose options for High gain, Low gain, FM signal blocking and band-specific dual antenna use if required.
Unlike the consumer-ready Amplify product, Amplify+ does not include a USB powering option for indoor use.
Outdoor Heavy-Duty Housing
Amplify+ is constructed of a die-cast metal housing with weatherproof ports to support outdoor installations in extreme weather conditions.
Adjustable Amplification
Amplify+ provides adjustable settings that allow the installer to select the appropriate gain required for a specific installation scenario, eliminating the potential issues encountered from either too much or too little gain. The internal switch can be placed at either a High or Low setting.
Adjustable FM Trap
Amplify+ provides a trap mechanism to block unwanted FM Radio signals from FM-enabled commercial TV antennas, which can cause interference with UHF and VHF television signals. Pass-through of FM signals can be enabled or disabled via an internal switch.
LTE Filtering
Like the consumer-ready Amplify product, Amplify+ provides 3G/4G/5G LTE signal filtering. The proliferation of LTE signal towers and connected LTE devices are a growing cause of intermittent disruption of over-the-air broadcast television signals. These disruptions can result in weak signals, pixelation or even channel loss, and can be especially disruptive when an amplifier is used with a TV antenna.
What’s Included
| AMPLIFY+ TV Antenna Amplifier |
| Power Inserter |
| Power Adapter |
| Mounting U-Bolt |
| (2) Mounting Screws |
| Installation Guide |
| 1-Year Limited Warranty |
Features
| Improves Signal Quality |
| Dual Antenna Inputs (VHF & UHF) |
| Switchable FM Trap |
| Decreases Pixilation |
| May Increase Number of Channels |
| Ultra Low Noise |
| Adjustable Gain |
| Blocks LTE Interference from 3G/4G/5G Smartphones and Transmitters |
| EMI & FM Out of Band Filtering |
| Will Support ATSC 3.0, NextGen TV and 4K Broadcast when Available |
| Housing Offers RF Shielding for Reducing Interference |
| Heavy-Duty Rated for Outdoor Use |
| Mast Mounted for Close Proximity to Antenna |
Tech Specs
| Impedance (Input and Output) | 75 Ohm |
| Connector | F-type |
| Frequency range | 54MHz~88MHz, 174MHz~260MHz, and 470MHz~609MHz |
| Gain VHF | +23dB (High) / +16dB (Low) |
| Gain UHF | +26dB (High) / +20dB (Low) |
| Gain Combined | +23dB (High) / +16dB (Low) |
| Noise Figure | 1.5dB |
| UL Listed | Yes |
| RoHS Compliant | Yes |
| Return Loss | <-15dB |
| Input Voltage | 12-15 VDC |
| FM Trap | 95-108 MHz; >13dB Down |
| Operating Temperature | -40 C to +60 C |
| Size (Product) | 5.375 x 3.5 x 3.0 in |
| Size (Packaging) | 8.125 x 5.125 x 3.0 in |
| Weight (Product) | 13 oz |
| Weight (Packaging) | 2 lb |